TWiki Access Control
Restricting read and write access to topics and webs, by Users and groups
TWiki Access Control allows you restrict access to single topics and entire webs, by individual user and by user Groups. Access control, combined with
TWikiUserAuthentication, lets you easily create and manage an extremely flexible, fine-grained privilege system.
Tip: TWiki:TWiki.TWikiAccessControlSupplement on TWiki.org has additional documentation on access control.
An Important Control Consideration
Open, freeform editing is the essence of
WikiCulture - what makes TWiki different and often more effective than other collaboration tools. For that reason, it is strongly recommended that decisions to restrict read or write access to a web or a topic are made with great care - the more restrictions, the less Wiki in the mix. Experience shows that
unrestricted write access works very well because:
- Peer influence is enough to ensure that only relevant content is posted.
- Peer editing - the ability for anyone to rearrange all content on a page - keeps topics focused.
- In TWiki, content is transparently preserved under revision control:
- Edits can be undone by the administrator (per default a member of TWikiAdminGroup; see #ManagingGroups).
- Users are encouraged to edit and refactor (condense a long topic), since there's a safety net.
As a
collaboration guideline:
- Create broad-based Groups (for more and varied input), and...
- Avoid creating view-only Users (if you can read it, you should be able to contribute to it).
Permissions settings of the webs on this TWiki site
Please Note:
- WikiGuest is the guest account - used by unauthenticated users.
- The web must not deny view to WikiGuest; otherwise, people will not be able to register.
Note: Above table comes from
SitePermissions
Authentication vs. Access Control
Authentication: Identifies who a user is based on a login procedure. See
TWikiUserAuthentication.
Access control: Restrict access to content based on users and groups once a user is identified.
Users and Groups
Access control is based on the familiar concept of Users and Groups. Users are defined by their
WikiNames. They can then be organized in unlimited combinations by inclusion in one or more user Groups. For convenience, Groups can also be included in other Groups.
Managing Users
A user can create an account in
TWikiRegistration. The following actions are performed:
- WikiName and encrypted password are recorded using the password manager if authentication is enabled.
- A confirmation e-mail is sent to the user.
- A user home page with the WikiName of the user is created in the Main web.
- The user is added to the WikiUsers topic.
The default visitor name is
TWikiGuest. This is the non-authenticated user.
Managing Groups
The following describes the standard TWiki support for groups. Your local TWiki may have an alternate group mapping manager installed. Check with your TWiki administrator if you are in doubt.
Groups are defined by group topics located in the
Main
web. To create a new group, visit
TWikiGroups and enter the name of the new group ending in
Group
into the "new group" form field. This will create a new group topic with two important settings:
-
Set GROUP = < list of Users and/or Groups >
-
Set ALLOWTOPICCHANGE = < list of Users and/or Groups >
The GROUP setting is a comma-separated list of users and/or other groups. Example:
-
Set GROUP = Main.SomeUser, Main.OtherUser, Main.SomeGroup
The ALLOWTOPICCHANGE setting defines who is allowed to change the group topic; it is a comma delimited list of users and groups. You typically want to restrict that to the members of the group itself, so it should contain the name of the topic. This prevents users not in the group from editing the topic to give themselves or others access. For example, for the KasabianGroup topic write:
-
Set ALLOWTOPICCHANGE = Main.KasabianGroup
Note: TWiki has strict formatting rules. Make sure you have three spaces, an asterisk, and an extra space in front of any access control rule.
The Super Admin Group
A number of TWiki functions (for example, renaming webs) are only available to administrators. Administrators are simply users who belong to the
SuperAdminGroup. This is a standard user group, the name of which is defined by {SuperAdminGroup} setting in
configure. The default name of this group is the
TWikiAdminGroup
. The system administrator may have chosen a different name for this group if your local TWiki uses an alternate group mapping manager but for simplicity we will use the default name TWikiAdminGroup in the rest of this topic.
You can create new administrators simply by adding them to the
TWikiAdminGroup topic. For example,
-
Set GROUP = Main.ElizabethWindsor, Main.TonyBlair
A member of the Super Admin Group has unrestricted access throughout the TWiki, so only trusted staff should be added to this group.
Restricting Access
You can define who is allowed to read or write to a web or a topic. Note that some plugins may not respect access permissions.
- Restricting VIEW blocks viewing and searching of content. When you restric VIEW to a topic or web, this also restricts INCLUDE and Formatted SEARCH from showing the content of the topics.
- Restricting CHANGE blocks creating new topics, changing topics or attaching files.
- Restricting RENAME prevents renaming of topics within a web.
Note that there is an important distinction between CHANGE access and RENAME access. A user can CHANGE a topic, but thanks to version control their changes cannot be lost (the history of the topic before the change is recorded). However if a topic or web is renamed, that history may be lost. Typically a site will only give RENAME access to administrators and content owners.
Controlling access to a Web
You can define restrictions on who is allowed to view a Foswiki web. You can restrict access to certain webs to selected Users and Groups, by:
- authenticating all webs and restricting selected webs: Topic access in all webs is authenticated, and selected webs have restricted access.
- authenticating and restricting selected webs only: Provide unrestricted viewing access to open webs, with authentication and restriction only on selected webs.
- You can define these settings in the WebPreferences topic, preferable towards the end of the topic:
-
Set DENYWEBVIEW = < comma-delimited list of Users and Groups >
-
Set ALLOWWEBVIEW = < comma-delimited list of Users and Groups >
-
Set DENYWEBCHANGE = < comma-delimited list of Users and Groups >
-
Set ALLOWWEBCHANGE = < comma-delimited list of Users and Groups >
-
Set DENYWEBRENAME = < comma-delimited list of Users and Groups >
-
Set ALLOWWEBRENAME = < comma-delimited list of Users and Groups >
If your site allows hierarchical webs, then access to sub-webs is determined from the access controls of the parent web, plus the access controls in the sub-web. So, if the parent web has
ALLOWWEBVIEW
set, this will also apply to the subweb. Also note that you will need to ensure that the parent web's
FINALPREFERENCES
does not include the access control settings listed above. Otherwise you will not be able override the parent web's access control settings in sub-webs.
Creation and renaming of sub-webs is controlled by the WEBCHANGE setting on the parent web (or ROOTCHANGE for
root webs). Renaming is additionally restricted by the setting of WEBRENAME in the web itself.
Note: If you restrict access to the Main, make sure to add the
TWikiRegistrationAgent
so that users can register. Example:
-
-
Set ALLOWWEBCHANGE = TWikiAdminGroup, TWikiRegistrationAgent
Note: For Web level access rights Setting any of these settings to an empty value has the same effect as not setting them at all. Please note that the documentation of TWiki 4.0 and earlier versions of TWiki 4.1 did not reflect the actual implementation, e.g. an empty ALLOWWEBVIEW does
not prevent anyone from viewing the web, and an an empty DENYWEBVIEW does
not allow all to view the web.
Controlling access to a Topic
- You can define these settings in any topic, preferable towards the end of the topic:
-
Set DENYTOPICVIEW = < comma-delimited list of Users and Groups >
-
Set ALLOWTOPICVIEW = < comma-delimited list of Users and Groups >
-
Set DENYTOPICCHANGE = < comma-delimited list of Users and Groups >
-
Set ALLOWTOPICCHANGE = < comma-delimited list of Users and Groups >
-
Set DENYTOPICRENAME = < comma-delimited list of Users and Groups >
-
Set ALLOWTOPICRENAME = < comma-delimited list of Users and Groups >
Remember when opening up access to specific topics within a restricted web that other topics in the web - for example, the
WebLeftBar - may also be accessed when viewing the topics. The message you get when you are denied access should tell you what topic you were not permitted to access.
Be careful with empty values for any of these.
-
Set ALLOWTOPICVIEW =
This means the same as not setting it at all. (This was documented wrong in versions 4.0.X, 4.1.0 and 4.1.1)
-
Set DENYTOPICVIEW =
Since TWiki 4.0 this means do not deny anyone the right to view this topic. If DENYTOPICVIEW is set to an empty value anyone has access even if ALLOWTOPICVIEW or ALLOWWEBVIEW is defined. This allows to have very restrictive default access rights to an entire web and still allow individual topics to have more open access.
The same rules apply to ALLOWTOPICCHANGE/DENYTOPICCHANGE and APPLYTOPICRENAME/DENYTOPICRENAME. Setting ALLOWTOPICCHANGE or ALLOWTOPICRENAME to en empty value means the same as not defining it. Setting DENYTOPICCHANGE or DENYTOPICRENAME to an empty value means that anyone can edit or rename the topic.
If the same setting is defined multiple times the last one overrides the previous. They are not OR'ed together.
The setting to an empty has caused confusion and great debate and it has been decided that the empty setting syntax will be replaced by something which is easier to understand in a later version of TWiki. A method to upgrade will be provided. Please read the release notes carefully when you upgrade.
See "How TWiki evaluates ALLOW/DENY settings" below for more on how ALLOW and DENY interacts.
Securing File Attachments
By default, TWiki does not secure file attachments. Without making the following changes to the twiki.conf file, it is possible for anyone who has access to the server to gain access to an attachment if they know the attachment's fully qualified path, even though access to the topic associated with the attachment is secured. This is because attachments are referred to directly by Apache, and are not by default delivered via TWiki scripts. This means that the above instructions for controlling to topics do
not apply to attachments unless you make the changes as described below.
An effective way to secure attachments is to apply the same access control settings to attachments as those applied to topics. This security enhancement can be accomplished by instructing the webserver via Apache's
mod_rewrite
module to redirect accesses to attachments via the TWiki
viewfile
script, which honors the TWiki access controls settings to topics.
The preferred method to secure attachments is by editing the
twiki.conf
file to include:
ScriptAlias /twiki/bin/ /filesystem/path/to/twiki/bin/
Alias /twiki/pub/ /filesystem/path/to/twiki/pub/
RewriteEngine on
RewriteCond %{REQUEST_URI} !^/+twiki/+pub/+(TWiki|Sandbox)/+.+
RewriteRule ^/+twiki/+pub/+(.*)$ /twiki/bin/viewfile/$1 [L,PT]
Notes:
- You can use TWiki:TWiki/ApacheConfigGenerator to generate the Apache config file for TWiki.
- You will need to restart your Apache server after this change.
- Images embedded in topics will load slower since attached images will also be delivered by the
viewfile
script. The TWiki web and Sandbox web are excluded for performance reasons.
- As an alternative to editing the
twiki.conf
file used by Apache, you can make the same change directly to the .htaccess
file in the /twiki/bin
directory.
- The
viewfile
script sets the mime type based upon file name suffix. Unknown types are served as text/plain which can result in corrupt files.
Controlling who can manage top-level webs
Top level webs are a special case, because they don't have a parent web with a
WebPreferences. So there has to be a special control just for the root level.
- You can define these settings in the Main.%TWIKIPREFSTOPIC% topic, preferable towards the end of the topic:
-
Set DENYROOTCHANGE = < comma-delimited list of Users and Groups >
-
Set ALLOWROOTCHANGE = < comma-delimited list of Users and Groups >
Note that you do
not require
ROOTCHANGE
access to rename an existing top-level web. You just need
WEBCHANGE
in the web itself.
How TWiki evaluates ALLOW/DENY settings
When deciding whether to grant access, TWiki evaluates the following rules in order (read from the top of the list; if the logic arrives at
PERMITTED or
DENIED that applies immediately and no more rules are applied). You need to read the rules bearing in mind that VIEW, CHANGE and RENAME access may be granted/denied separately.
- If the user is an administrator
- If DENYTOPIC is set to a list of wikinames
- people in the list will be DENIED.
- If DENYTOPIC is set to empty ( i.e. Set DENYTOPIC = )
- access is PERMITTED i.e no-one is denied access to this topic.
Attention: Use this with caution. This is deprecated and will likely change in the next release.
- If ALLOWTOPIC is set
- people in the list are PERMITTED
- everyone else is DENIED
- If DENYWEB is set to a list of wikinames
- people in the list are DENIED access
- If ALLOWWEB is set to a list of wikinames
- people in the list will be PERMITTED
- everyone else will be DENIED
- If you got this far, access is PERMITTED
Access control and INCLUDE
ALLOWTOPICVIEW and ALLOWTOPICCHANGE only applies to the topic in which the settings are defined. If a topic A includes another topic B, topic A does not inherit the access rights of the included topic B.
Examples: Topic A includes topic B
- If the included topic B has ALLOWTOPICCHANGE set to block editing for a user, it does not prevent editing the including topic A.
- If the included topic B has ALLOWTOPICVIEW set to block view for a user, the user can still view topic A but he cannot see the included topic B. He will see a message No permission to view B
Access Control quick recipes
Obfuscating Webs
Another way of hiding webs is to keep them hidden by not publishing the URL and by preventing the
all webs
search option from accessing obfuscated webs. Do so by enabling the
NOSEARCHALL
variable in
WebPreferences:
This setup can be useful to hide a new web until content its ready for deployment, or to hide view access restricted webs.
Note: Obfuscating a web without view access control is
very insecure, as anyone who knows the URL can access the web.
Restrict Access to Whole TWiki Site
For a firewalled TWiki, e.g. an intranet wiki or extranet wiki, you want to allow only invited people to access your TWiki. In this case, enable
user authentication with ApacheLogin and lock down access to the whole
twiki/bin
and
twiki/pub
directories to all but valid users. In the Apache
.htaccess
file or the appropriate
.conf
file, replace the
<FilesMatch "(attach|edit|...
section with this:
<FilesMatch ".*">
require valid-user
</FilesMatch>
If needed, you can further restrict access to selected webs with ALLOWWEBVIEW and other access control settings.
Note: With this configuration, someone with access to the site needs to register new users.
Authenticate all Webs and Restrict Selected Webs
Use the following setup to authenticate users for topic viewing in all webs and to restrict access to selected webs. Requires
TWikiUserAuthentication to be enabled.
- Set
require valid-user
on your view
script in .htaccess or the appropriate Apache .conf file. As of 4.x, this looks like: FilesMatch "(attach|edit|manage|rename|save|view|upload|mail|logon|.*auth).*"
(normally view
is not in that list).
- Restrict view access to selected Users and Groups. Set one or both of these variables in its WebPreferences topic:
-
Set DENYWEBVIEW = < list of Users and Groups >
-
Set ALLOWWEBVIEW = < list of Users and Groups >
- Note:
DENYWEBVIEW
is evaluated before ALLOWWEBVIEW
. Access is denied if the authenticated person is in the DENYWEBVIEW
list, or not in the ALLOWWEBVIEW
list. Access is granted if DENYWEBVIEW
and ALLOWWEBVIEW
are not defined.
- If you still want public users to be able to register automatically follow TWiki:TWiki.RegisterOnViewRestrictedSite.
Authenticate and Restrict Selected Webs Only
Use the following setup to provide unrestricted viewing access to open webs, with authentication only on selected webs. Requires
TWikiUserAuthentication to be enabled.
- Restrict view access to selected Users and Groups. Set one or both of these variables in its WebPreferences topic:
-
Set DENYWEBVIEW = < list of Users and Groups >
-
Set ALLOWWEBVIEW = < list of Users and Groups >
- Note:
DENYWEBVIEW
is evaluated before ALLOWWEBVIEW
. Access is denied if the authenticated person is in the DENYWEBVIEW
list, or not in the ALLOWWEBVIEW
list. Access is granted if DENYWEBVIEW
and ALLOWWEBVIEW
are not defined.
Hide Control Settings
Tip: To hide access control settings from normal browser viewing, you can put them into the
topic preference settings by clicking the link
Edit topic preference settings
under
More topic actions
menu. Preferences set in this manner are not visible in the topic text, but take effect nevertheless. Access control settings added as topic preference settings are stored in the topic meta data and they override settings defined in the topic text.
Alternatively, place them in HTML comment markers, but this exposes the access setting during ordinary editing.
<!--
* Set DENYTOPICCHANGE = Main.SomeGroup
-->
Related Topics: AdminDocumentationCategory,
TWikiUserAuthentication,
TWiki:TWiki.TWikiAccessControlSupplement
--
Contributors: TWiki:Main.PeterThoeny,
TWiki:Main.MikeMannix,
TWiki:Main.CrawfordCurrie